ソースを表示

{{HCL}}

[[en:HCL/Printers]]
[[fr:HCL/Printers]]

<!-- 
The table layout looks very bad on low resolution - & if there´s a special procedure needed to install/configure the device it doesn´t fit ... the Table of contents will do better.

Please do not remove my description of the Z602 installation - as it is not that straight forward (especially not for beginners).

24.11.2005, Patrik Gfeller (gfellerpatrik (at) gmx.net)
  -->

{{Intro-frame|General information on printing in openSUSE is currently (4 July 2007) spread in few articles where [[YaST Printer]] and [[:Category:SDB:Printing|SDB Printing]] articles are good start for openSUSE. It is also good to check [http://www.linux-foundation.org/en/OpenPrinting Linux Printing] for the latest in linux, that usually will become available in next openSUSE release currently under development. See [[Released Version]] and [[Development Version]].}} 


[[Image:Icon-printer.png]]


= Brother =

See http://solutions.brother.com/linux/sol/printer/linux/cups_drivers.html

== Laser HL-2040 ==
Autodetected: {{y}}, USB port, 10.2 rpm install{{y}}   [http://www.swerdna.net.au/linhowtohl2040.html HowTo notes]
----

== Laser HL-1850 ==
Autodetected: {{y}}, USB port, 10.2 rpm install{{y}}   [http://solutions.brother.com/linux/sol/printer/linux/cups_drivers.html Download CUPS Driver]  at bottom of page, then follow these [http://solutions.brother.com/linux/sol/printer/linux/cups_gdi_install.htm instructions]
----

= Canon =
== i320 ==
Autodetected: {{y}}. USB port, Must use Turboprint drivers

== i450 ==
Autodetected: {{y}}. USB port, Works fine with Canon BJC-7004 Foomatic/bjc800

== i550 ==
Autodetected: {{n}}, USB port, 10.0

Select model Canon BJC-7100 and change PPD file to Foomatic/bjc800.

== PIXMA i1600 ==
Autodetected: {{y}}, USB port, Driver -- cnijfilter-ip2200 rpm available

== PIXMA ip4200 ==
Autodetected: {{y}}, USB port, Working with [ftp://download.canon.jp/pub/driver/bj/linux/ Canon's Filters]

== MP770 ==
Autodetected: {{n}}  古いドライバで印刷に成功　しかしスキャナ機能は利用不可

----

= Casio =
== KL-P1000 ==
Autodetected: {{n}}, USB port, 10.1 (factory)
Supported with [http://www.tu-harburg.de/~soda0231/pegg/pegg.html pegg]
----
= Epson =
== Stylus Color C62 ==
Autodetected: {{y}}

Default printing is slower than default printing in Windows, but it can be changed using [[YaST Printer]] or dialog ''Properties'' from ''Print'' menu item in every application. This is probably valid for all other Epson printers in Stylus Color series.
For maintenance, like query ink levels, can be used ''escputil'' that is included in distribution. For more information type  ''escputil --help''.

== Stylus Color C64 ==
Autodetected: {{y}}

Works good, auto-detected by YaST, but slower printing than on Windows.

== Stylus Color C66 ==
Autodetected: {{y}}

SUSE Linux versions: 10.2

USB

Use TurboPrint proprietary driver for full resolution printing.

== Stylus Color C70 ==
Autodetected: {{y}}

Works good, auto-detected by YaST. It prints slower than on Windows.

== Stylus 440 ==
Autodetected: {{n}} Sometimes Autodetected... When it is not, it may require manual driver install. Usually Works.

== Stylus Color 740 ==
Autodetected: {{y}}, Parallel and USB, 9.3 and later

Works good, and you can use <tt>escputil</tt> to check ink levels, clean and test ink cartridges.
YaST configures the printer for use with Gutenprint (formerly GIMP-Print) drivers.

== Stylus Color 880 ==
Autodetected: {{y}}, Parallel and USB, 10.2, USB connection is recommended for best results.

== Stylus Photo 830 ==
Autodetected: {{y}}

== Stylus Photo R300 ==
Autodetected: {{y}} - Working Correctly: {{y}} - USB port, SuSE 10.0, 10.1, 10.2

== Stylus Photo RX425 ==
Autodetected: {{y}}, USB, Suse 10.1

Works well, uses RX500 driver for printer, scanner autodetected as RX425, works perfectly, card reader detects all cards.

== Stylus Photo RX620 ==
Autodetected: {{y}}, USB, Suse 10.2 (bad colormanagement on 9.3)

Works well using Gutenprint v5.0.0 driver for printer. Scanner autodetected as RX420/RX630 using epkowa, card reader detects all cards.

== Stylus D 68 == Photo Edition
Autodetected: {{y}} - working correctly - USB, SUSE 10.2
----

= Hewlett-Packard =

== DesignJet 90r (inkjet, large format A2+) ==
Autodetected: {{y}} using Yast printer module or CUPS, TCP/IP adapter, SUSE Linux 10.1

== Deskjet 832C ==
Autodetected: {{y}}, Parallel-Port and USB, 9.3 and later

== Deskjet 840C ==
Autodetected: {{y}}, USB, 10.2

== Deskjet 842C ==
Autodetected: {{y}}, Parallel-Port, 10.1

== Deskjet 940C ==
Autodetected: {{y}}, Parallel-Port and USB, 10.2, USB connection is recommended for best results.

== Deskjet 656C ==
Autodetected: {{y}}, USB, 10.0, 10.1, default Foomatic/hpijs driver for local printer with CUPS/IPP

== Deskjet 5652 ==
Autodetected: {{y}}, USB, 10.0, 10.1, works well with CUPS/IPP

== Deskjet D2360 == 
Autodetected: {{y}}, USB, 10.2


== OfficeJet 5610 ==
Autodetected: {{y}}, USB, 10.2

== Laserjet 1010 ==
Autodetected: : {{y}}, USB port,10.2 {{y}} works fine, sometimes a page "Unsupported Personality: PCL", restart of printer necessary

== Laserjet 1000 Laserjet 1005 Laserjet 1018 Laserjet 1020 Laserjet 1022 ==
Autodetected: : {{y}}, USB port, 10.1 {{y}} -- 10.2 {{y}}[Manual install required, see http://foo2zjs.rkkda.com/]

== Laserjet 1020 ==
Autodetected: {{y}}, USB port, 10.0, 10.1 [Manual install required{{y}}]

[http://www.swerdna.net.au/linhowtohplaser1020.html HowTo for SuSE 10.0, 10.1]

== Laserjet 4L ==
Autodetected: {{y}}, Parallel-Port, SUSE Linux 10.0

== Laserjet 4P ==
Autodetected: {{y}}, Parallel-Port, SUSE Linux 10.1

== Laserjet 4000 (b/w) ==
Working printer by means of Samba (shared printer), SuSE 10.1

== Laserjet 4100tn (b/w) ==
Autodetected: {{y}} using Yast printer module or CUPS, TCP/IP adapter, SUSE Linux 10.1

== Laserjet 4200dtn (b/w) ==
Autodetected: {{y}} using Yast printer module or CUPS, TCP/IP adapter, SUSE Linux 10.0, 10.1, 10.2

== Laserjet 4250tn (b/w) ==
Autodetected: {{y}} using Yast printer module or CUPS, TCP/IP adapter, SUSE Linux 10.1

== Laserjet 4600dn (colour) ==
Autodetected: {{y}} using Yast printer module or CUPS, TCP/IP adapter, SUSE Linux 10.1

== PSC 1110 ==
Autodetected: {{y}}, USB port, 9.3 and later

== PSC 1215 ==
Autodetected: {{y}}, USB port, 10.0

== PSC 1315 ==
Autodetected: {{y}}, USB port, 10.0

== PSC 2110 ==
Autodetected: {{y}}, USB port, 9.3 and 10.0

== PSC 2175 ==
Autodetected: {{y}}, USB port, 10.2, everything works beautifully, including the HP Toolbox

== PSC 2500 ==
Autodetected: {{n}}, Network, 9.3 and 10.0 

Available as a network printer with TCP/IP port 9100. You should configure it via YaST and input the printer's IP address manually. The PPD files is available from the list.
<!--Please correct, My English may be bad.-->

== PSC 2610 ==
Autodetected: {{q}} - Network attached, 9.3 and 10.0

Easy to install, tell YAST there is a network printer at its address and it is an HP DeskJet and the jobs a good-un

== Photosmart 2570 ==
Autodetected: {{n}}<br>
Just select Photosmart 2600 when installing, and the '''printer''' will work. I don't know about scaner.
<!--I'm not sure if "Photosmart" means **exactly** the same as PSC. Feel free to correct it. And, if it does, you can put it above (so it all goes alphabetically. Thanx! -->
----

= Kyocera =
== FS-680 ==
Autodetected: {{y}}, Parallel port, Suse 10.2

Works perfectly.
----
= Lexmark =
== E120 ==

Autodetected: {{n}}

It does not work with its own driver, but works just fine with "Optra E" one.

== E220 ==

Autodetected: {{n}} USB, 10.0, 10.2

Works: {{y}} Requires manual driver setup.

There is no Linux driver for that printer model, but experimentation shows, that it work great with "Optra E+" drivers.

== Z602 ==
Autodetected: {{n}}

SUSE Linux doesn´t provide a driver for the Lexmark Z602 - however, there´s a [[http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:1:0:390:0:0&emeaframe=&fileID=1151 RedHat Linux 9.0 driver]]

'''Installation Procedure (SUSE Linux 10.0, SUSE Linux 10.1)'''

 > wget http://www.downloaddelivery.com/srfilecache/CJLZ600LE-CUPS-1.0-1.TAR.gz 
 > tar -xvf ./CJLZ600LE-CUPS-1.0-1.TAR.gz
 > chmod 755 ./z600cups-1.0-1.gz.sh
 > ./z600cups-1.0-1.gz.sh -keep 2>/dev/null
 > cd installer
 > su
 > rpm --install ./z600cups-1.0-1.i386.rpm --nodeps
 > rpm --install ./z600llpddk-2.0-1.i386.rpm --nodeps
 > rpm --erase z600llpddk --justdb
 > rpm --erase z600cups --justdb

Now you can use YaST to configure your Z602 (LEXMARK > Z600 Color Jetprinter)
----
= Minolta =
== magicolor 2430 DL ==

Autodetected: {{y}}, supplied with Linux driver, but I was not able to use it.
Finally printer works with foo2zjs driver:
[[http://www.linuxprinting.org/show_printer.cgi?recnum=Minolta-magicolor_2430_DL LinuxPrinting.org]]
----
= OKI =
== C9800hdtn (led printer, colour) ==

Autodetected: {{y}} using Yast printer module or CUPS, TCP/IP adapter, SUSE Linux 10.1
----
= Ricoh =
== Aficio 3030 ==

Autodetected: {{y}} using Yast printer module or CUPS, TCP/IP adapter, SUSE Linux 10.1
----
= Samsung =
== ML1520 ==

Autodetected: {{y}}, 9.n and 10.n. USB only, supplied with Linux driver, but used default driver supplied with SUSE.

== ML1710P ==

Autodetected: {{y}}, 10.n. USB only, supplied with Linux driver, but used default driver supplied with SUSE.

== ML2010 ==

Autodetected: {{y}}. 9.x, 10.0x, 10.1x USB Use ML200 driver -- 10.2x default driver in YAST

Driver included on setup disk problematic for pre-10.2 Use ML200 instead. 
----

= Xerox =
== Phaser 6120 ==

Autodetected: {{y}}, supplied with Linux PPD, or download from Xerox
[[http://http://www.support.xerox.com/go/prodselect.asp?]]

Works with openSUSE 10.2 out of box.
----
= 外部リンク =
:[[Image:Novell.png|15px]] [http://cdb.novell.com/ Novell SUSE Linux - Hardware Compatibility List]
:[[Image:Novell.png|15px]] [http://developer.novell.com/yessearch/Search.jsp Novell SUSE Linux Certified Hardware]
:[http://www.linuxprinting.org LinuxPrinting.org] - search there if your printer is not listed here